Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #19: Tue Dec 19 17:36:27 CST 2006
    mixx941@amd64.localhost:/usr/obj/usr/src/sys/AMD643000
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (2009.79-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory  = 1610547200 (1535 MB)
avail memory = 1543643136 (1472 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfc002000-0xfc002fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfc003000-0xfc003fff irq 21 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <NVIDIA nForce3 250 USB 2.0 controller> mem 0xfc004000-0xfc0040ff irq 22 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <NVIDIA nForce3 250 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe400-0xe40f,0xe800-0xe87f irq 20 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci2: <Promise PDC20269 UDMA133 controller> port 0x8000-0x8007,0x8400-0x8403,0x8800-0x8807,0x8c00-0x8c03,0x9000-0x900f mem 0xfb000000-0xfb003fff irq 18 at device 6.0 on pci2
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcm0: <Creative Audigy 2 (EMU10K2)> port 0x9400-0x943f irq 16 at device 8.0 on pci2
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
fwohci0: <1394 Open Host Controller Interface> mem 0xfb010000-0xfb0107ff,0xfb004000-0xfb007fff irq 17 at device 8.2 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:00:91:01:6c:20
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:01:6c:20
fwe0: Ethernet address: 02:02:3c:01:6c:20
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0x9c00-0x9cff mem 0xfb012000-0xfb012fff irq 17 at device 9.0 on pci2
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
skc0: <Marvell Gigabit Ethernet> port 0xa000-0xa0ff mem 0xfb008000-0xfb00bfff irq 19 at device 11.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0f:ea:4f:83:8b
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
atapci3: <ITE IT8212F UDMA133 controller> port 0xa410-0xa417,0xa800-0xa803,0xac10-0xac17,0xb000-0xb003,0xb400-0xb40f irq 16 at device 12.0 on pci2
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
fwohci1: <Texas Instruments TSB43AB23> mem 0xfb011000-0xfb0117ff,0xfb00c000-0xfb00ffff irq 18 at device 14.0 on pci2
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:0f:ea:00:00:47:38:9b
fwohci1: Phy 1394a available S400, 3 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:0f:ea:47:38:9b
fwe1: Ethernet address: 02:0f:ea:47:38:9b
fwe1: if_start running deferred for Giant
sbp1: <SBP-2/SCSI over FireWire> on firewire1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xd2000-0xd47ff,0xd5000-0xd57ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounter "TSC" frequency 2009790351 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
ad0: 194481MB <Maxtor 6B200R0 BAH41BM0> at ata0-master UDMA133
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <LITE-ON DVDRW SOHW-1693S/KS04> at ata1-slave UDMA33
ad6: 305245MB <Seagate ST3320620AS 3.AAC> at ata3-master SATA150
ad8: 76344MB <MAXTOR 6L080J4 A93.0500> at ata4-master UDMA133
ad10: 78166MB <Maxtor 6Y080P0 YAR41BW0> at ata5-master UDMA133
ad11: 156334MB <Maxtor 6Y160P0 YAR41BW0> at ata5-slave UDMA133
ad12: 194481MB <Maxtor 6B200P0 BAH41BM0> at ata6-master UDMA133
ad14: 239372MB <Maxtor 6Y250P0 YAR41BW0> at ata7-master UDMA133
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <SUN DLT4000 CC2E> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
sa1 at ahc0 bus 0 target 6 lun 0
sa1: <ARCHIVE Python 06241-XXX 912L> Removable Sequential Access SCSI-3 device 
sa1: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
cd0 at ata1 bus 0 target 1 lun 0
cd0: <LITE-ON DVDRW SOHW-1693S KS04> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ch0 at ahc0 bus 0 target 6 lun 1
ch0: <ARCHIVE Python 06241-XXX 912L> Removable Changer SCSI-3 device 
ch0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
ch0: 6 slots, 1 drive, 1 picker, 0 portals
Trying to mount root from ufs:/dev/ad0s1a
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
sk0: link state changed to UP